Science Lab Exhaust Gas Calorimeter

Specification:

The Exhaust gas calorimeter water heat exchange to be used with multi-cylinder engine.  
Small vertical finned tubes enclosed in insulated stainless steel chamber.  
Determination of the thermal exhaust gas losses is essential when calculating an energy balance for internal combustion engines.
It involves a largely complete and loss-free heat exchange between the exhaust gas and a cooling medium.
Exhaust gas from engine can be connected to the calorimeter and flow around the finned tubes while cooling water flows inside the tubes.  
Chamber can be disassembled for cleaning the finned tubes.  
Instruments gear for display of water flow rate, temperatures of exhaust and water. Requires water supply
Calorimetric measurement is an established method of doing this.  

FEATURES:
Counter flow heat exchanger for calorimetric analysis of exhaust gases from internal combustion engines
Determination of the amount of heat contained in the exhaust gas from test engines
Calorimeter consisting of finned pipe heat exchanger and insulated tank
Instrumentation: 4 temperature sensors, flow meter
Measuring amplifier with digital displays
Connection between engine and calorimeter using exhaust gas hose
Cold water connection and drain required.

SPECIFICATION:
Calorimeter
Insulated, stainless steel
Finned pipe heat exchanger
Heat exchange area on exhaust gas side: 0,944m2
Heat exchange area on water side: 0,141m2
Measuring ranges

Temperature:
2x 0…600°C (exhaust gas)
2x 0…200°C (cooling water)
Flow rate: 0…160L/h
230V, 50Hz, 1 phase